DJI Matrice 400

Beskrivelse

Long-Endurance Drone Platform With Power-Line-Level Obstacle Sensing

DJI Matrice 400

Engineered for Excellence, Designed for Versatility

DJI Matrice 400, the enterprise flagship drone platform, boasts an impressive 59-minute flight time ^[1], a payload capacity of up to 6 kg ^[2], and integrated rotating LiDAR and mmWave radar for power-line-level obstacle sensing ^[3]. It also supports the O4 Enterprise Enhanced Video Transmission and Airborne Relay Video Transmission ^[4], ensuring safer handling and easier operations. Combining Smart Detection with visible and thermal imaging, AR projection, ship-based takeoff/landing, and advanced automation, Matrice 400 excels in emergency response, power inspections, mapping, and AEC.

Extended Flight Time,
High Speed Performance

Matrice 400’s flight capabilities are outstanding, offering up to 59 minutes of forward flight time even with a payload, and up to 53 minutes of hovering duration ^[6]. These capabilities make it a reliable tool for long-duration and continuous operations such as search and rescue, firefighting, and large-scale mapping. It can also avoid large obstacles ^[3] like buildings and mountains at flight speeds of up to 25 m/s.

Depending on the task, Matrice 400 can be equipped with the Zenmuse H30 Series, L2, P1, S1 Spotlight, V1 Speaker, Manifold 3, or third-party payloads, thereby expanding its capabilities and unlocking the full potential of the DJI ecosystem.

Flight Time

Estimate the Matrice 400’s flight time based on payload configuration.

Robust Video Transmission

O4 Enterprise Enhanced Video Transmission System

Thanks to the ten-antenna system on the aircraft and the high-gain phased array antenna system on the remote controller, the O4 Enterprise Enhanced Video Transmission System can achieve image transmission up to 40 km ^[10].

Matrice 400 also supports the sub2G frequency band ^[5], and when equipped with two DJI Cellular Dongle 2 ^[11], it can automatically switch to the better available carrier network, providing a more stable signal even in urban interference environments or remote regions.

Airborne Relay Video Transmission ^[5]

Matrice 400 has a built-in video transmission relay module. With this setup, one Matrice 400 can serve as a relay drone, flying high to provide relay signals for another Matrice 400 operating at a greater distance. This capability significantly extends the transmission range, making it ideal for search and rescue tasks as well as inspections in mountainous areas.

Aircraft Fusion Positioning

The omnidirectional sensing performance ^[12] brought by rotating LiDAR, high-precision mmWave radar, and full-color low-light fisheye vision sensors provides Matrice 400 with strong positioning capabilities. It can fly stably close to glass-facade buildings or wind turbine blades and safely return from building edges, mountain bases, or bridge sides even when the return point has not been updated.

Full-Color Vision Assist

The four full-color low-light fisheye vision sensors on the aircraft provide Full-Color Vision Assist ^[13] to ensure safer flight.

Smart AR Projection

Power Line AR

During tasks such as power grid inspection, the obstacle sensing system automatically detects frontal wire obstacles ^[3] and displays easily recognizable AR lines on the remote controller’s screen, making the surrounding environment clear at a glance and ensuring safer flight.

Map View AR

When operating during the day or night in urban regions, the remote controller can display the names of buildings and landmarks in real-time, marking core roads with prominent lines.

AR Flight Waypoint

Real-time route preview is available for the drone during RTH, obstacle sensing, and FlyTo operations. During landing, the AR Aircraft Shadow can be displayed to help operators confirm the landing location.

Live Annotations

Without modeling, you can mark points on the remote controller screen to obtain subject locations, draw lines to measure distances between multiple points, and outline areas to calculate their size. Measurement results can be synchronized to the DJI FlightHub 2 to enhance team efficiency.

Real-Time Terrain Follow

Matrice 400 supports Real-Time Terrain Follow flight in any horizontal direction ^[15]. This feature can be enabled during both manual flight and automated flight routes, ensuring stable relative height to the ground.

During large-scale search and rescue operations, the size of ground subjects can be kept consistent on the remote controller screen, reducing the need for frequent zoom adjustments and improving efficiency. During mapping missions, a consistent ground sampling distance (GSD) can be maintained to obtain high-precision mapping data.

Takeoff and Landing on Ships ^[16]

To address the needs of offshore operations such as maritime patrol and wind turbine inspection, Matrice 400 is equipped with the capability to take off from and land on ships, supporting takeoff from stationary vessels and landing on moving vessels. By detecting landing point patterns on the deck, it can achieve safe and precise landings.

Intelligent Flight Modes

Cruise

Activate cruise control mode to pilot the drone in a specific direction without constantly pressing the control sticks, making long-distance flights or linear inspections easier.

FlyTo

In emergencies or disasters, the drone can automatically adjust its flight path and speed based on the surrounding environment, allowing it to reach a designated location without manual adjustments.

Smart Track

Smart Track allows for precise subject positioning and automatic zoom adjustments, allowing you to switch between subjects easily. It can automatically reacquire a subject even if obscured briefly.

POI

POI enables continuous observation and 3D modeling of buildings while orbiting a designated area, greatly enhancing the efficiency of fixed-point observation and modeling tasks.

Easier Automated Operations

Power Line Follow With Zenmuse L2

When equipped with the L2 LiDAR system, Matrice 400 can perform automated power transmission and distribution line following flights. It uses the rotating LiDAR to detect obstacles in real time and automatically bypasses crossing lines.

Slope Route & Geometric Route

Matrice 400 supports the planning and execution of slope and geometric routes via DJI Pilot 2 or DJI FlightHub 2. Whether conducting detailed aerial surveys of building facades, slopes, or other inclined surfaces, or collecting mapping data of individual buildings or structures, Matrice 400 can quickly plan slope or geometric routes to efficiently acquire high-precision data.

Comprehensive Accessory Upgrades

DJI RC Plus 2 Enterprise Enhanced

DJI RC Plus 2 Enterprise Enhanced Remote Controller features a new high-brightness screen that remains clearly visible even in direct sunlight. It has an IP54 protection rating and can operate in temperatures ranging from -20° to 50° C (-4° to 122° F). Equipped with the O4 Enterprise Enhanced Video Transmission, it features a built-in high-gain antenna array, providing strong performance. It also supports the sub2G module and 4G hybrid transmission solutions, ensuring stable and smooth video feeds in both urban high-rise and mountainous environments.

DJI Cellular Dongle 2 ^[11]

The DJI Cellular Dongle 2 offers 4G network video transmission and can work together with the O4 Enterprise Enhanced Video Transmission System, ensuring safe flights in complex environments. Additionally, it provides mobile network connectivity for the remote controller.

TB100 Battery

The TB100 Intelligent Flight Battery uses high-performance, high-energy cells and can be charged up to 400 cycles, reducing the cost per flight. It also features enhanced heat dissipation and is equipped with a self-heating system for improved reliability.

TB100C Tethered Battery

The TB100C Tethered Battery is compatible with third-party tethered lighting and communication products, enabling long-duration aerial lighting and communication base station functions via cable. Reserved ports are available to support third-party development of automated recharging station products, such as drone docks.

BS100 Intelligent Battery Station

The intelligent battery station is a one-stop solution for battery charging, storage, and transport. It can charge up to three TB100 batteries and two WB37 batteries sequentially. With a fast charging time of just 45 minutes ^[18] per TB100 battery, it ensures seamless, uninterrupted flight operations. In Silent Mode, noise levels are as low as 36 dB ^[19].

D-RTK 3 Multifunctional Station

The D-RTK 3 Multifunctional Station can serve as a base station to provide centimeter-level positioning for multiple drones simultaneously. Additionally, the new Rover Station Mode, combined with the DJI Enterprise app and DJI Terra, provides a comprehensive solution for high-precision aerial surveying applications, ensuring accurate operations.

Software Designed for Industries

DJI FlightHub 2

Specifically for the Matrice 400, DJI FlightHub 2 has been upgraded to enable cloud-based remote control, allowing operators to control the aircraft’s flight attitude and official payloads, as well as to perform remote takeoff, landing, and Live Flight Controls. In addition, it supports a wide range of flight route planning functions, including slope routes, geometric routes, and other advanced route types. During multi-drone operations, operators can remotely synchronize and display multiple livestreams across screens, creating a new, efficient air-ground integrated operation experience.

* Users who purchase Matrice 400 and bind it to FlightHub 2 upon activation will receive allocated live streaming minutes, map imagery quotas, and cloud storage space.

DJI Terra

DJI Terra is a 3D model reconstruction software that has photogrammetry as its core technology. It supports accurate and efficient 2D and 3D reconstruction using visible light data, as well as point cloud data reconstruction and processing with DJI Zenmuse L2. DJI Terra is an ideal match for DJI Matrice 400 and its payloads. It works in conjunction to build a complete application solution that caters to vertical scenarios such as land surveying and mapping, power line inspection, emergency response, construction, and forestry.

DJI Modify

DJI Modify provides intelligent 3D mesh and point cloud model editing. When paired with the Matrice 400 and DJI Terra, it can create an integrated solution covering aerial surveying, modeling, model repair, and sharing.

Open Developer Ecosystem

Intelligent Algorithm Developer

Provides the necessary model training tools and third-party developer certification process to access onboard computing capability, helping to expand new application fields for drones.

PSDK

The newly upgraded E-Port V2 supports USB 3.0 high-speed payload communication and delivers up to 120 watts of power per port. The E4 port of the E-Port V2 can be expanded into four payload ports via the E-Port Hub expansion plate, unlocking broader application scenarios and greater potential for the Matrice 400.

MSDK

Mobile SDK 5 simplifies the development of apps to control the Matrice 400. It comes with fully open-source, production-level code samples with core modules adapted from DJI Pilot 2, guaranteeing high reliability.

Cloud API

With DJI Pilot 2’s built-in Cloud API (MQTT-based protocol), you can directly connect the Matrice 400 to third-party cloud platforms. Access the drone’s hardware, video live-stream, and photo data without having to develop an app.

Open Data Access

Developers can leverage payload, LiDAR, mmWave radar, and vision sensor data interfaces to build innovative applications and expand the DJI ecosystem.

Specifications:

^{The actual product weight may vary due to differences in batch materials and external factors.}

• Max Takeoff Weight

  • 15.8 kg

• Dimensions

  • Unfolded: 980×760×480 mm (L×W×H) (with landing gear)
    Folded: 490×490×480 mm (L×W×H) (with landing gear and gimbal)

^{Maximum dimensions excluding propellers.}

Aircraft carrying case dimensions: 779×363×528 mm (L×W×H)

• Max Payload

  • 6 kg

    ^{The 6 kg payload is measured at the third gimbal connector under sea level conditions. Payload capacity decreases as altitude increases. For details, refer to the official user manual.}

• Propeller Size

  • 25 inches

• Diagonal Wheelbase

  • 1070 mm

• Max Ascent Speed

  • 10 m/s

• Max Descent Speed

  • 8 m/s

• Max Horizontal Speed (at sea level, no wind)

  • 25 m/s

• Max Takeoff Altitude

  • 7000 m

• Max Flight Time (no wind)

  • 59 minutes

    ^{Measured with the aircraft flying forward at a constant speed of 10 m/s in a windless environment at sea level, carrying only the H30T (total weight 10,670 g), and from 100% battery level until 0%. Data is for reference only. Actual experience may vary depending on the environment, usage, and firmware version.}

• Max Hover Time (no wind)

  • 53 minutes

    ^{Measured with the aircraft hovering in a windless environment at sea level, carrying only the H30T (total weight 10,670 g), and from 100% battery level until 0%. Data is for reference only. Actual usage time may vary depending on the flight mode, accessories, and environment.}

• Max Flight Distance (no wind)

  • 49 km

    ^{Measured by the aircraft flying forward at a constant speed of 17 m/s in a windless environment at sea level, without external payloads, and from 100% battery level until 0%. Actual experience may vary depending on the environment, usage, and firmware version.}

• Max Wind Speed Resistance

  • 12 m/s

    ^{Max wind speed resistance during takeoff and landing.}

• Max Yaw Angular Velocity

  • Yaw: 100°/s

• Max Pitch Angle

  • 35°

• Operating Temperature

  • -20° to 50° C (-4° to 122° F) (without solar radiation)

• Global Navigation Satellite System (GNSS)

  • GPS + Galileo + BeiDou + GLONASS*

    ^{* GLONASS is supported only when the RTK module is enabled.}

    Equipped with standard airborne ADS-B In receiver and dual antennas, supporting reception up to 20 km.

• Hovering Accuracy Range (with moderate or no wind)

  • Vertical:
    ±0.1 m (with vision positioning)
    ±0.5 m (with satellite positioning)
    ±0.1 m (with RTK positioning)

Horizontal:
±0.3 m (with vision positioning)
±0.5 m (with satellite positioning)
±0.1 m (with RTK positioning)

• RTK GNSS Accuracy

  • RTK Fix:
    1 cm + 1 ppm (horizontal), 1.5 cm + 1 ppm (vertical)

• RTK Heading

  • Supports RTK heading with an accuracy better than 2°

• Airborne ADS-B In

  • Equipped with standard airborne ADS-B In receiver and dual antennas, supporting reception up to 20 km.

• Internal Storage

  • N/A

• Ports

  • USB-C Debug Port × 1: USB 2.0
    E-Port V2 × 4: At the lower part of the drone, with 120W single-port power
    Cellular Dongle 2 Interface × 2: On the underside of the drone

• Propeller Model

  • 2510F

• Beacon

  • Built into the aircraft

• Ingress Protection Rating

  • IP55

    ^{The rating is not permanently effective and may decrease due to product wear and tear.}

Downward:
The ground has rich textures and sufficient lighting conditions*, with a diffuse reflection surface and a reflectivity greater than 20% (such as walls, trees, people, etc.).

^{* Sufficient lighting conditions refer to an illuminance not lower than that of a nighttime city light scene.}

• Rotating LiDAR

  • Standard Measurement Range: 0.5-100 m @ 100,000 lux with 10% reflectivity target
    Measurement Range for Power Line: 35 m @ 30° @ 10,000 lux for 21.6 mm steel-core aluminum stranded wire with a relative body tilt angle of 30° to the left and right
    Field of View (FOV): 360° (horizontal), 58° (vertical)
    Point-Frequency: 520,000 points/second
    Laser Wavelength: 905 nm
    Eye Safety Level: Class 1 (IEC60825-1:2014), eye-safe

• Upper LiDAR (3D ToF)

  • 0.5-25 m at night (reflectivity > 10%)
    The FOV to the up and down is 60° and 60° to the right and left.

• Downward 3D Infrared Range Sensor

  • Measurement Range: 0.3-8 m (reflectivity > 10%)
    The FOV to the front and rear is 60° and 60° to the right and left.

• mmWave Radar

  • Measurement Range for Power Line:
    36 m for a 12.5mm steel-core aluminum stranded wire
    50 m for a 21.6mm steel-core aluminum stranded wire
    FOV: ± 45° (horizontal and vertical)

^{The mmWave radar function is unavailable in some countries/regions.}

^{Operating frequency allowed varies among countries and regions. Refer to local laws and regulations for more information.}

• Max Transmission Distance (unobstructed, free of interference)

  • 40 km (FCC)
    20 km (CE/SRRC/MIC)

^{Measured in an unobstructed environment free of interference. The above data shows the farthest communication range for one-way, non-return flights under each standard. During your flight, please pay attention to RTH reminder on the DJI Pilot 2 app.}

• Max Transmission Distance (with interference)

  • Strong interference (dense buildings, residential areas, etc.): approx. 1.5-6 km
    Medium interference (suburban counties, city parks, etc.): approx. 6-15 km
    Weak interference (open spaces, remote areas, etc.): approx. 15-40 km

^{Data is tested under FCC standard in unobstructed environments of typical interference. Only to serve as a reference and provides no guarantee as to the actual flight distance.}

• Max Download Speed

  • Standard Mode: 80Mbps Downlink
    Playback Download: < 25 MBps
    Single-Channel Bitrate: ≤ 12 Mbps

^{The above data was measured under conditions where the aircraft and remote controller were in close proximity without interference.}

• Antenna

  • WLAN Antenna × 8: 6 vertically polarized antennas and 2 horizontally polarized antennas
    sub2G Antenna × 2: 2 vertically polarized antennas
    4G Antenna × 4

Operating Mode: 2T4R

• Others

  • Supports Dual Control Mode and 2-channel Cellular Dongle 2

WB37 Battery Interface:
100-240 V: Approx. 52 W

USB-C:
5.0 V 3.0 A, 9.0 V 3.0 A, 12.0 V 3.0 A, 15.0 V 3.0 A, 20.0 V 3.25 A

• Number of Charging Channels

  • Three TB100 and two WB37 batteries

• Charging Mode

  • Ready-to-Fly Mode 90%; Standard Mode 100%
    Supports Fast Charging Mode and Silent Mode

• Charging Time

  • TB100/TB100C Battery From 0% to 100%:
    220 V: 45 minutes (Fast Charging Mode); 110 minutes (Silent Mode)
    110 V: 70 minutes (Fast Charging Mode); 110 minutes (Silent Mode)

^{Charging time is measured in a test environment with a temperature of 25° C.}

^{Measured in an unobstructed environment free of interference. The above data shows the farthest communication range for one-way, non-return flights under each standard. During your flight, please pay attention to RTH reminder on the DJI Pilot 2 app.}

• Video Transmission Operating Frequency and Transmitter Power (EIRP)

  • 902-928 MHz: < 30 dBm (FCC), < 16 dBm (MIC)
    2.400-2.4835 GHz: < 33 dBm (FCC), < 20 dBm (CE/SRRC/MIC)
    5.150-5.250 GHz: < 23 dBm (FCC/CE)
    5.725-5.850 GHz: < 33 dBm (FCC), < 14 dBm (CE), < 30 dBm (SRRC)

^{Operating frequency allowed varies among countries and regions. Refer to local laws and regulations for more information.}

• Antenna

  • 2T4R, 2.4GHz/5.8GHz multi-beam high-gain antenna
    sub2G Module: 2T2R

• Enhanced Transmission

  • Supports DJI Cellular Dongle 2

• Wi-Fi Protocol

  • Wi-Fi Direct, Wireless Display, IEEE 802.11 a/b/n/ac/ax
    Supports 2×2 MIMO Wi-Fi, dual-band simultaneous (DBS) support for dual MAC, with data rates up to 1774.5 Mbps (2×2 + 2×2 11ax dual-band simultaneous)

• Wi-Fi Operating Frequency

  • 2.4000-2.4835 GHz
    5.150-5.250 GHz
    5.725-5.850 GHz

^{5.2 and 5.8GHz frequencies are prohibited in some countries. In some countries, the 5.2GHz frequency is only allowed for use in indoor.}

• Wi-Fi Transmitter Power (EIRP)

  • 2.4 GHz: < 26 dBm, < 20 dBm (CE/SRRC/MIC)
    5.1 GHz: < 23 dBm (FCC/CE/SRRC/MIC)
    5.8 GHz: ＜ 23 dBm (FCC/SRRC), ＜ 14 dBm (CE)

• Bluetooth Protocol

  • Bluetooth 5.2

• Bluetooth Operating Frequency

  • 2.400-2.4835 GHz

• Bluetooth Transmitter Power (EIRP)

  • ＜ 10 dBm

• Screen Resolution

  • 1920 × 1200

• Screen Size

  • 7.02 inches

• Screen Frame Rate

  • 60fps

• Brightness

  • 1400 nits

• Touchscreen Control

  • 10-Point Multi-Touch

• Built-in Battery

  • 2S2P High Energy Density 18650 Lithium-ion Battery (6500 mAh @ 7.2 V) 46.8 Wh

• External Battery

  • Optional, WB37 (4920 mAh @ 7.6 V) 37 Wh

• Charging Type

  • Supports PD fast charging, with a maximum 20V/3.25A USB Type-C charger

• Storage Capacity

  • RAM 8G + ROM 128G UFS + expandable storage via microSD card

• Charging Time

  • 2 hours for internal battery; 2 hours for internal plus external batteries.

    ^{When remote controller is powered off and using a standard DJI charger.}

• Internal Battery Runtime

  • 3.8 hours

• External Battery Runtime

  • 3.2 hours

• Output Port

  • HDMI 1.4

• Indicators

  • Status LED, battery level LED, connection status LED, tricolor light, brightness adjustable according to ambient light

• Speaker

  • Supports buzzer

• Audio

  • Array MIC

• Operating Temperature

  • -20° to 50° C (-4° to 122° F)

• Storage Temperature

  • Within one month: -30° to 45° C (-22° to 140° F)
    One to three months: -30° to 35° C (-22° to 113° F)
    Three months to one year: -30° to 30° C (-22° to 86° F)

• Charging Temperature

  • 5° to 40° C (41° to 104° F)

• Supported Aircraft Model

  • Matrice 400

• Global Navigation Satellite System

  • GPS + Galileo + BeiDou

• Dimensions

  • 268×163×94.5 mm (L×W×H)

    ^{Width including external antenna folded, thickness including handle and controller sticks.}

• Weight

  • 1.15 kg (without external battery)

• Model

  • TKPL 2

• System Version

  • Android 11

• External Interfaces

  • HDMI 1.4, SD 3.0, USB-C with OTG support, max 65W PD charging, USB-A with USB 2.0 support

• Accessories

  • Strap/waist support

Notes

• Always check and strictly abide by local laws and regulations before flying.
• All data on this page was collected with a production model of DJI Matrice 400 in a controlled test environment. Actual experience may vary depending on the environment, usage, and firmware version.
• All videos and photos on this page were shot in strict compliance with local laws and regulations. Demos, including wildlife, were shot from a safe distance and are used for reference only. Please observe local laws and regulations and ensure the aircraft has obtained relevant certifications before flying.
• Before use, Matrice 400 must be activated via the DJI Pilot 2 app.

1. Measured with the aircraft flying forward at a constant speed of 10 m/s in a windless environment at sea level, carrying only the H30T (total weight 10,670 g), and from 100% battery level until 0%. Data is for reference only. Actual experience may vary depending on the environment, usage, and firmware version.
2. The 6 kg payload is measured at the third gimbal connector under sea level conditions. Payload capacity decreases as altitude increases. For details, refer to the official user manual.
3. Power line obstacle sensing capability: When directly facing a transmission line (21.6 mm steel-core aluminum stranded wire), obstacle sensing is supported at speeds up to 25 m/s. When both transmission lines (21.6 mm steel-core aluminum stranded wire) and distribution lines (12 mm steel-core aluminum stranded wire) are present, obstacle sensing is supported at speeds up to 17 m/s. Obstacle sensing performance may vary depending on environmental conditions (such as cloud, fog, rain, or snow), as well as the material, position, and shape of the target object. Due to the limitations of the safety system, the aircraft cannot actively avoid fast-moving objects; please fly with caution in such environments. Refer to the user manual for more information. The mmWave radar function is unavailable in some countries/regions.
4. This feature is unavailable in countries or regions without 5GHz frequency support. Refer to local laws and regulations for more information.
5. Operating frequency allowed varies among countries and regions. Refer to local laws and regulations for more information.
6. Measured with the aircraft hovering in a windless environment at sea level, carrying only the H30T (total weight 10,670 g), and from 100% battery level until 0%. Data is for reference only. Actual usage time may vary depending on the flight mode, accessories, and environment.
7. The E4 port of E-Port V2 can be expanded into four payload ports via the E-Port Hub expansion plate. For more detailed information, visit https://developer.dji.com/payload-sdk to learn more.
8. Sold separately.
9. Please follow the requirements stated in the IP55 protection rating instructions. Measured in a controlled environment. The IP rating is not permanently effective and may decrease due to product wear and tear.
10. Measured with FCC compliance in an unobstructed environment with low interference at a flight altitude of approximately 120 m. Data is for reference only. During your flight, please pay attention to reminders in the app.
11. To use 4G Enhanced Transmission, the remote controller must be equipped with the DJI Cellular Dongle 2 (sold separately) or connected to the internet via Wi-Fi. This service is not available in some countries and regions. Please consult your local dealer for details.
12. There are certain blind areas of visual sensing and infrared sensing. Positioning and obstacle-sensing performance may be affected by the flight environment and obstacle characteristics. Please fly with caution.
13. When ambient light is below 12 lux, the visual sensor switches to black-and-white mode.
14. Zenmuse H30 Series required.
15. DJI Pilot 2 required.
16. It is recommended to use the feature when the ship speed is below 10 knots and the wind speed is below 5 m/s; exercise caution in other environments. It is recommended to reserve a 3 m × 3 m takeoff and landing space on the deck. Standard landing point pattern files are available on the download page.
17. The following accessories are all compatible with Matrice 400.
18. Charging time is measured based on a 220-volt voltage.
19. Measured in a controlled environment. Results may vary depending on the environment, actual use, and firmware version.
20. Service offerings may vary by country or region. For details, please consult your local dealer. Free Repairs: Get free repairs within the coverage scope and amount; Coverage for Your Whole Fleet: Shared coverage can be extended to other DJI Enterprise devices bound to DJI Care Enterprise Plus within the same time period (30 calendar days) after the first activation and binding; Free Shipping: Available in regions covered by DJI Care Enterprise. Users are responsible for additional costs including logistics and customs duties incurred beyond the scope of coverage. The official extended warranty covers the following components: aircraft body, intelligent battery station, remote controller, single downward gimbal module, dual downward gimbal module, and third gimbal connector.