Emlid Reach RS4

kr 38 600 eks. MVA

  • All-band RTK GNSS-mottaker med helningskompensasjon
  • Høy presisjon selv under tett tak
  • Leveres med en mobilapp
  • Høypresisjons-RTK: 7 mm + 1 ppm
  • Tilt-kompensasjon: RTK: 2 mm + 0,3 mm/°
 

Beskrivelse

Emlid Reach RS4

 

 

All-band RTK GNSS receiver. Ultimate precision, even in the most challenging conditions.

 

 

 

 

High-accuracy, even under canopy

 

 

 

The Reach RS4 can track all available satellite constellations and frequencies, including the lower L5 and L6 bands, which are more resistant to multipath and interference. With 672 channels, it can track 40+ satellites at a time. These features ensure reliable performance and centimeter-level precision

7mm + 1 ppm in RTK  672 channels  L1/L2/L5/L6  Fix in less than 5 seconds  GPS, GLONASS, Galileo, BeiDou, QZSS, NavIC

 

 

Next-gen tilt compensation

 

 

The Reach RS4 delivers accurate results even at high tilt angles — for example, a 30° tilt still achieves 18 mm precision.1 The compensation mechanism activates with just a few moves and remains stable throughout the survey, saving time and avoiding the need for recalibration.

Factory-calibrated  Immune to interference  Faster initialization  No angle limit

 

 

 

Quick release mount

 

 

 

This mount is specifically designed for tilt compensation, eliminating backlash and securing the receiver firmly to the survey pole. Even a small amount of wobble between the device and the pole can compromise the accuracy when tilting. The quick-release system provides a fast and reliable connection for maximum precision.

 

 

Base and rover

 

NTRIP

Work in RTK with VRS or a single baseline CORS network in RTCM3 format. You can also connect another GNSS receiver as an NTRIP base using Emlid NTRIP Caster

 

Dual-band radio

UHF 450 MHz:

Transmit and receive  Up to 2W  Compatible with Reach and 3rd-party receivers with TRIMTALK 450S support3

LoRa 915 MHz:

Transmit and receive  Up to 1W  Compatible with Reach receivers

 

 

Built to perform in extreme conditions

 

 

Magnesium alloy body

The RS4’s magnesium alloy body is as strong as it is lightweight. This material is often used for aerospace equipment and high-end electronics. It strikes the perfect balance of durability and lightness, making it ideal for use in tough conditions while remaining easy to handle.

16 hours on one charge

The RS4 offers an impressive battery life of up to 16 hours on a single charge. Use the USB-C for recharging or use a power bank for even greater flexibility. Designed to keep working as hard as you do, without interruption.

Waterproof

Thanks to its IP68 rating, the RS4 is fully dustproof and waterproof. Whether it’s raining, snowing or a dusty construction site, the Reach RS4 will keep working.

-40 to +65 ºС

The Reach RS4 operates in temperatures from -40°C to +65°C. Its performance remains excellent in both freezing cold and scorching heat.

 

 

Software for every stage of your project

 

 

The Reach RS4 comes with Emlid Flow, a comprehensive mobile and cloud solution compatible with both iOS and Android. It keeps your team aligned and your projects on track while supporting various site tasks.

 

Coordinate your team

Invite team members, share projects and manage access

Monitor field progress from the office and exchange data instantly with real-time sync

One workflow for the whole team, with data that is always up to date, a consistent interface, and no additional training required

 

Execute projects on site

Topographic surveys – gather terrain and elevation data accurately

Stakeout & layouts – place points, lines, and markers directly in the field

Line & road surveys – stake centerlines and offsets with precision

Cut & Fill calculations – measure earthworks and stockpiles on site

As-built verification – check constructed structures against your plans

 

 

 

Specification

 

Mechanical

  • Dimensions: 128.6 x 128.6 x 99.3 mm
  • Weight: 920 g
  • Operating temperatures: -40 to +65 °C
  • Ingress protection: IP68

Electrical

  • Autonomy 16 hrs as RTK rover with tilt
  • Battery Li-Ion 5000 mAh, 7.2 V 36 Wh
  • Charging USB Type-C (PD): 5V—3A, 9V—3A, 12V—3A, 15V—3A

Positioning

  • Static H: 4 mm + 0.5 ppm, V: 8 mm + 1 ppm
  • PPK H: 5 mm + 0.5 ppm, V: 10 mm + 1 ppm
  • RTK H: 7 mm + 1 ppm, V: 14 mm + 1 ppm
  • Tilt compensation: RTK + 2 mm + 0.3 mm/°
  • Convergence time: ~5 s typically

Connectivity

  • LoRa radio up to 1W
    • Frequency range: 868/915 MHz
    • Power: 0.1 W
    • Distance: Up to 8 km
  • UHF radio up to 2W
    • Frequency range: 410–470 MHz
    • Protocols: TRIMTALK 450S
    • Modulation type: GMSK
  • LTE modem
    • Regions: Global
    • Bands:
      • FDD-LTE: 1, 2, 3, 4, 5, 7, 8, 12, 13, 18, 19, 20, 26, 28
      • TD-LTE: 38, 39, 40, 41
      • UMTS (UHPS/FDD): 1, 2, 5, 8, Quad-band, 850/1900, 900/1800 MHz
    • SIM card: Nano-SIM
  • Wi-Fi: 802.11a/b/g/n
  • Bluetooth: 5.1 (BR/EDR + LE)
  • Ports: RS-232, USB Type-C

Data

  • Corrections: NTRIP, RTCM3
  • Position output: NMEA, LLH/XYZ
  • Data logging: RINEX, NMEA, LLH/XYZ, UBX
  • Internal storage: 16 GB

GNSS

  • Signal tracked:
    • GPS: L1C/A, L2C, L5,
    • GLONASS: L1OF, L2OF,
    • Galileo: E1-B/C, E5a, E6,
    • BeiDou: B1I, B1C, B2a, B3I,
    • QZSS: L1C/A, L1C/B11, L2C, L5,
    • NavIC: L1-SPS Data, L5-SPS
  • Number of channels: 672
  • Update rates: up to 10 Hz